C-100-1 INK General Purpose Marking Ink

Description:	Non-oxidizing solvent-based general purpose ink. Use on Absorbent and nonabsorbent surfaces.
Application:	For Direct or Offset Marking. One of the easiest inks to use with the JanTech Model 105 System.
Ink Specifications
DOT:	Not Regulated	Viscosity:	Paste
VOC:	See MSDS	Colorant:	Pigment
HMIS:	H F R	Imprint Drying Time:	30-90 minutes
Thinner/Reducer:	C-100-1 SDT. Do NOT use thinner/reducer as a cleaner.	Shelf Life:	12 months. May be resolubilized with additional ink or thinner.
Open Time:	6-10 hours	Flash Point:	315° F
Package:	6-8 oz. weight tubes. Weight varies with color.	Mixing:	No mixing required for all colors, except silver & gold.
Colors:	Black, White, Orange, Silver, Gold, Yellow, Red, Green and Gray. Other colors available on special order.
Cure Cycle:	1. Imprints will cure at room temp. 2. Imprints will be tack free in 1-2 hrs. 3. Parts may be handle in 6-8 hrs.
Cleaners:	Care should be used to assure compatibility with the marking equipment. The following cleaners are commonly used: 1. 99% isopropyl alcohol 2. Acetone